Dean D Installation & Operation Manual

Also see for CFD: Service and parts manual Service & parts manual

Dean D Installation & Operation Manual Manual pdf 15 page image

HIGH EFFICIENCY DECATHLON (HD) SERIES GAS FRYERSCHAPTER 3: INSTALLATION3-23.3 Installing Casters and LegsA. Install casters and/or legs near where the fryer is to be used, as neither is secure for longtransit. Decathlon Series gas fryers cannot be curb-mounted and must be equipped witheither legs or casters provided.B. After unpacking, use a pallet or lift jack to raise the unit before installing the casters.C. Align the caster or leg base holes with the leg support assembly and insert bolt. Installthe washers and nut hand tight, and repeat for all four holes in caster/leg base assembly.D. Tighten the caster/leg against the leg support assembly by using appropriate tools.Ensure that all four bolts are evenly tightened. Tighten the bolts to 50 inch-lbs. (5.65 Nm)torque.E. For fryer with casters, there are no built-in leveling devices. The floor where thefryers are installed must be level.1/4-20 x 3/4 Hex Bolt1/4-20 Hex Head LocknutWasherLeg Support AssemblyFront Channel orRear Channel1/4-20 x 3/4 Hex BoltFront Channelor Rear ChannelFront or Rear Leg withMounting PlateAdjust as neededFront View Rear Side ViewRear Caster—5" RigidOptional Caster-Rear OnlyFront Caster—5" Swivelw/BrakeOptional Caster-Front OnlyWARNINGDean fryers equipped with legs are for permanent installations. Fryers fitted withlegs must be lifted during movement to avoid damage and possible bodily injury. Fora moveable or portable installation, Dean optional equipment casters must be used.Questions? Call 1-800-551-8633.Caster/Leg Installation and Adjustment