Genesis-VP Directional™ User’s ManualGenesis-VP Directional™ User’s Manual1. Quick StartIf you are already familiar with operating and using police radar guns,you probably will want to follow the quick start instructions1.1 Initial Set Up1.1.1 Insert the BatteriesRemove the Black & Decker® VersaPak™ batteries from theirpackage and charge them according to the VersaPak™ instructionsheet See section 2 1 2: Battery Charger for more informationabout using the battery charger After charging the batteries,insert them into the handle gripFigure 1.1.1Insert the batteries into the handle gripPush the batteries into the receptacles in the bottom of the handleuntil you hear them snap into place25/Aug/20101.1.2 Control Panel FunctionsThe factory default settings for the control panel are:Defaultdir Direction tAbL Backlight OnAud Audio volume 3SEn Sensitivity 5SLh Squelch On1.2 Trigger OperationThe Genesis-VPD transmits and receives microwave energy whenyou pull the trigger When you want to lock onto a speed, releasethe trigger, then pull it again within 1/2 second The speed in the leftwindow will move to the right window and fash alternately betweenit and a directional indicator (t means the target vehicle is movingtoward you, and A means away ) The locked speed clears when youpull the trigger again1.3 Measuring a Target SpeedThe Genesis-VPD operates in Strongest Signal mode, which is thedefault If you have purchased Faster Target software, you can selectthe Faster mode of operation with the FAST button In Faster mode,the Genesis-VPD can operate in Faster-Toggle or Faster-Hold setting,which you select in the secondary menu See section 3: OperatingModes for more information2. Components2.1 BatteriesThe Genesis-VPD comes with a Black & Decker® InterchangeableBattery System: two nickel-metal-hydride (NiMH), gold label, 3 6-voltVersaPak™ batteries and a two-port AC charger Please read all theinstructions and warnings on the VersaPak™ instruction sheet toensure proper use and storage of your batteries25/Aug/20108 9