Decatur Electronics Genesis VP Directional User Manual

Also see for Genesis VP Directional: User manual

Contents

Decatur Electronics Genesis VP Directional User Manual Manual pdf 9 page image

Genesis-VP Directional™ User’s ManualGenesis-VP Directional™ User’s Manual3.1 Primary MenuYou can use the factory default settings listed on the next page oryou can select your own settings To select a setting, repeatedly pressthe MENU button until the setting you want to change appearsThen press the select (SEL) button to advance through the selectionsfor that setting When you have made your selection, release thebuttons and your new settings will be in efect If neither MENU orSEL is pressed after 2 seconds, the radar gun will return to normaloperating mode Table 3 1 show the primary menu setting choicesFigure 3.1Primary menu settings25/Aug/2010DIRECTION (dir): Direction lets you select the direction of the motorvehicle you want to display The dir default value t A indicates thatyou are monitoring motor vehicles moving both toward and awayfrom the radar gunBACKLIgHT (bL): This turns on and of the LCD backlight bL ON isthe default settingAUDIO (Aud): The Audio setting controls the volume level ofthe Doppler tone The volume level settings are from 3 to 6 (3 isminimum and 6 is the highest volume level )• Previous versions may have a volume range of 0 to 6.For evidentiary reasons, it is recommended that theaudio level never be muted during normal operationSENSITIVITY LEVEL (SEn): The SEn option lets you control themaximum target-acquisition range SEn levels range from 0 through5 (0 is of, 1 is the minimum range, and 5 is the maximum range )SQUELCH (SLh): The squelch determines the type of Doppler audioyou want the radar gun to send out When squelch is on, the soundis only the Doppler tone for the displayed target When squelch is of,you will hear all Doppler tones, including other vehicles, interferenceand any noise the antenna receives3.2 Secondary MenuYou can use the factory default settings listed on the next pageor set your own To select the secondary menu settings, press andhold the select (SEL) button, then press the MENU button To selecta setting, press and release the MENU button until the setting youwant to change appears Then press and release the SEL button toadvance through that setting’s options When you have made yourselection(s), release the buttons and the new settings will be in efectIf neither MENU or SEL is pressed after 2 seconds, the radar gun willreturn to normal operating mode25/Aug/201016 17