4.4.2 Enable/Disable optionsA number of settings are available to allow the Technician to reposition text and determine suitableaction when errors occur. Selecting this brings up the following screen:The options are all set in the same way. To change the setting, move the cursor up/down until it isalongside the feature. Moving the joystick to the left or right (or pressing the left/right directionarrows) will scroll through alternative settings. Moving up or down will fix the value on the screen.The ‘Text edit’ option determines whether screen text will be edited locally, that is selected from thedome’s own screen options; or whether it is compiled at the system Control Panel and transferredto the dome within the Dennard/DM serial protocol.The ‘Head info’ option enables text to be displayed, in the top corner of the screen, indicating thecurrent configuration of the dome and information on some of its current actions. The display maybe positioned at the left or right of the screen.‘Error display’ enables the flashing square to appear to indicate any communication errors.‘Power fail’ determines what the dome should do if power is lost. When the power is restored, thedome can either return to preset position number 1 or restart tour number 1. Selecting ‘none’ willresult in the dome remaining in its last position.4.4.3 Joystick controlThe dome may be controlled by a wide range of telemetry controllers and recorders with manydifferent joystick devices. To allow optimal use from the joystick a range of settings can beconfigured:Joystick divide determines the relationship between the fast and slow joystick speeds where thecontrol panel is able to offer this feature. The selection determines the mathematical ratio betweenfast and slow speeds for Pan and Tilt. Divide values between 2 and 128 are available.2040 / 2060 Menu System Manual Page. 24Text edit: localHead info disp:Head info just:Error display: enabledPower fail: noneSave and ReturnSave and ExitdisabledleftDivide by: 16Linear speed:Pan direction:Tilt direction:Horiz cursor:Vert cursor:Save and ReturnSave and Exit5defaultdefaultdefaultdefault