Dedicated Micros 2060 Operation Manual

Also see for 2060: Operation manual Quick start guide Installation manual System manual MENU SYSTEM MANUAL

Dedicated Micros 2060 Operation Manual Manual pdf 14 page image

Dedicated Micros ©20091 2060Set Date/Time/LanguageThe Dedicated Micros 2060 dome has a Real Time Clock which must be set up on installation. The unitmay also contain other language options and an ability to select and change the format for the time display.Selecting this option brings up the following screen:Language: English │Date Format: dd-mm-yy │Time Format: hh:mm:ss │Set Time and Date │Save and Return │Save and Exit │││To change the Language, Date Format or Time Format setting, move the cursor up/down until it is alongsidethe feature. Moving the joystick to the left or right (or pressing the left/right direction arrows) will scroll throughalternative settings. Moving up or down will fix the value on the screen.The time and date format determine the way in which the normal operator viewing screen displays the timeand date. Several options are available by scrolling through the list and it is also possible to switch the timeand date display off if preferred.When setting the time or date the following screen is presented:yymmddhhmm │Old _ _ _ _ _ _ _ │New _ _ _ _ _ _ _ │0 1 2 3 4 5 6 7 8 9 0 ││Accept Entry │Clear Entry │Return Without Change │Using the numerical entry, the current date and time can be entered or the existing values left unchanged.Preset Text OptionsThe names allocated to preset camera views can be created individually or a default name can be allocated.This default name is pre-programed as “Position” but this can be changed if required by using this facility. Thelocation of the name on the screen can also be adjusted. The following screen is presented:Preset txt justify : L │Default preset txt: On ││Edit default text │││Return │Exit │The preset position name can be displayed on the left or right of the screen or switched off by selecting theappropriate feature and moving left/right to toggle the value. If the default name needs to be altered thenselecting the Edit facility will bring up the virtual keyboard used to enter the name:││││││││││││││││││││││││