Dedicated Micros SD Range Installation And Operation Manual

Also see for SD Range: Installation and operation guide Quick start guide Installation and operation guide

Contents

Dedicated Micros SD Range Installation And Operation Manual Manual pdf 25 page image

Dedicated Micros ©2009 SD RangeUsing the IR Remote ControlPress the MENU button to access configuration menus via a connected local monitor. The menu willhave a red indicator highlighting the first option. Select a main menu heading to open a drop downlist of further sub-options. Press the Down Directional button to highlight the next menu option, pressOK to open the highlighted menu.Press the Right Directional button to highlight the first editable parameter on the screen.Use the Left/Right/Up/Down Directional buttons to move between fields.Select OK to start editing a field (the option will be outlined in green).Use the Up/Down Directional buttons to change the settings within an editable field.Numeric fields can be edited with the Directional buttons. Use the Up/Down Directional buttons toincrease/decrease by an increment of 1, use the Left/Right Directional buttons to increase/decreaseby an increment of 10.Use the OK button to accept a new setting. Use the coloured softkeys to select the accompanyingcolour option on screen i.e. red button to select the red option. To undo changes made to any menu,select the Refresh (Purple) option.Entering Alpha-Numeric Data via a Local MonitorNumeric or text data is entered using the on-screen Virtual Keyboard (Arrow Key Editor).To display the Virtual Keyboard, navigate to the relevant text input box using the Directional buttonsand double press the OK button twice on the IR Remote Control. The Virtual Keyboard is displayed.Use the Directional buttons to move between characters, use the OK button to select a character.Select ‘Submit’ to enter details, press ‘Cancel’ to exit without entering any text.Alpha-numeric data can also be entered in either upper or lower case format by ‘multi-tapping’a relevant button. For example, with the cursor located in the text entry window of the VirtualKeyboard, repeatedly tap button ‘1’ to cycle through the following characters: 1,A,a,B,b,C,c,1 etc.To select one of these characters, simply stop tapping the button when the chosen character isdisplayed. The cursor will then progress, ready for the next character entry.Note: A USB Keyboard (not supplied) can be connected via one of the USB ports on the unit. TheUSB Keyboard can then be used to enter alpha-numeric data via the local menus.Intelligent Security & Fire Ltd