Dedicated Micros SD Range Installation And Operation Manual

Also see for SD Range: Installation and operation guide Quick start guide Installation and operation guide

Contents

Dedicated Micros SD Range Installation And Operation Manual Manual pdf 93 page image

Dedicated Micros ©2009 SD RangeEvent SettingsThis menu allows actions to be established and configured for the Oracle Dome camera followingan alarm event. A Home position can be established for the camera and the delay time set for whatperiod of inactivity is required before the camera will be sent to its home position.Camera Selected camera channel.Camera Title Displays the title assigned to the selected camera channel.Event Name If required, enter a specific name for the alarm event.Type Select the alarm type from:EOL (End of Line), NC (Normally Closed), NO (Normally Open) orDisabled.Action Select a preset position or a patrol action for the camera uponalarm event.Relay Select an action for the relay. Select ‘Momentary’ for the relay tomomentarily switch state. Select ‘Duration’ to switch relay statusfor the duration of the alarm.Home (Grey) Select to send the camera to its predetermined home position.Action Select a preset or patrol from the accompanying drop down list.This preset/patrol will now be set as the cameras ‘home’ position.Delay Select the time ( in seconds) for which the camera is inactive i.e.no operator input, before returning to its home position.Save (Grey) Select to store Event Settings to the unit and the Oracle Domecamera memory.Intelligent Security & Fire Ltd