Defender 4K1T4B4 Manual

Also see for 4K1T4B4: Quick start guide Quick start guide

Defender 4K1T4B4 Manual Manual pdf 53 page image

5214.1.3 More Settings1. Click the Device Name field to change the name of the DVR or leave it as the default. TheDevice No. is the internal device number of the DVR.2. Use the Auto Logout drop-down to select the number of minutes before the DVR locks outthe menu functions showing only the Live View screen.  The DVR will require either thepassword or unlock pattern to re-open the menu once it has locked.3. Use the Menu Output Mode drop-down if you have more than one display connected tothe DVR to select which display will show the Menu and Toolbar (VGA or HDMI).4. Click Apply to save these settings.14.2 NETWORK RIGHT CLICK MENU > DEFENDER 4K MENU > CONFIGURATIONGENERALThis section is covered in the Setup Wizard section. The settings on this screen do not need to be changedthey are automatically assigned by your network when the Enable DHCP checkbox is selected and theNIC Type default should not be changed for regular use of the DVR.APP ACCESSThis section is covered in the Setup Wizard section. The Enable checkbox must be selected for the MobileApp connection to work. You can change the Verification Code from this screen if needed. The VerificationCode is required when setting up a Mobile App Account.PPPOEThis is an advanced setting. Contact your Internet service provider for details about PPPOE services.DDNSEnable the DDNS service to view your DVR from a computer. Contact your Internet service provider tosetup.NTPAllows you to setup your DVR to obtain the current date and time from our network. The Enable NTPcheckbox needs to be selected to allow the DVR to be updated. Interval (min) is the number of minutesthat will elapse for the internal clock on the DVR to update to match the NTP server – 60 minutes isrecommended.CONTENTS