Defender 4K1T4B4 Manual

Also see for 4K1T4B4: Quick start guide Quick start guide

Defender 4K1T4B4 Manual Manual pdf 72 page image

7120 HARD DRIVE INSTALLATIONThe 16 Channel DVR Kit comes a SATA cable and 4 screws so that you can install a second hard drive in the DVRunit. This will increase the storage capability of your DVR to accommodate the additional camera recordings.INSTALLATION STEPS:1. Remove the DVR cover screws from the back of the DVR unit.2. Slide the cover to the back of the DVR and lift upwards to remove it.3. Inside the DVR there is a space available for a second hard drive beside the one installed in the DVR.4. Use the 4 screws provided with your system to secure the second HDD to the DVR.5. Connect the Power cable inside the DVR to the second hard drive.  There are multiple plugs available,pick one.6. Use the SATA cable provided with your system to the HDD and the motherboard. Secure all cables usingthe tie inside the unit.7. Reconnect all the cables at the back of the DVR and turn on the unit.8. You will need to format the new HDD from either the SETUP WIZARD DVR HDD or by accessing the HDDSETTINGS General > HDD Information screen. You will now see the second HDD in the list. Click thecheckbox and Init to begin formatting.CONTENTS

/ 72

Related manuals for Defender 4K1T4B4