23 / 32 ENDryer / User ManualOperating the product5.10 Starting the programmePress the Start/Pause button to start the program.Start symbol will light up to indicate that theprogramme has started and “:” symbol in the middleof the remaining time will keep flashing. Drying andprogramme progress bar will be displayed alternately.5.11.Progress of programme5.12 Child LockMachine is equipped with a Child Lock which preventsinterfering with the current programme flow by pressingany button.To activate the Child Lock:• Press and hold Childproof Lock button for 3seconds.• Child Lock symbol will appear on the display whenthe Child Lock is activated.• All buttons except the On/Off/Cancel and ChildLock button on the control panel are deactivatedwhen the Child Lock is active.• Display symbols will not change even if the positionof Programme Selection knob is changed while thechild lock button is active.• When the programme selection knob is turned andfunction buttons are pressed Child Lock warningwill be displayed.• To start a new programme after the currentprogramme is over or to interrupt the currentprogramme, the Child Lock should be deactivated.To deactivate the childproof lock:• Press and hold Child Lock button for 3 seconds.• Child Lock is deactivated when the dryer isswitched off and on with On/Off/Cancel button.5.13 Changing the programme after ithas started• After the dryer starts operation, you can changethe selected programme and dry your laundry in adifferent programme.• Press and hold Start / Pause button for 1 secondsto pause the programme.• Select desired programme by turning theProgramme Selection knob.• Press the Start/Pause button to start the program.Adding / removing laundry while the dryer isin operation• In order to add or take out laundry after the dryingprogramme has started:• Press the Start/Pause button to switch the dryer toPause mode. Drying process will pause.• While in Pause mode, open the loading door, addor take out laundry and close the loading door.• Press the Start/Pause button to resume theprogram.C Any laundry added after the dryingprocess has started may cause theclothes that are already dried in themachine intermingle with wet clothes andthe result will be wet laundry after thedrying process is over.C You may repeat laundry adding orremoving process as many times asyou desire during drying. However, thisprocess will increase the programme timeand energy consumption since the dryingprocess will be interrupted repeatedly.Therefore, it is recommended to addlaundry before the drying programme hasstarted.