Defy GEMINI 770 TC BV Quick Start Manual

Page 9Installation3The hob must be installed by a qualifiedelectrician in accordance with nationalregulations. Installation is the buyer’sresponsibility. The manufacturer accepts noliability for this service. Any action that themanufacturer has to take as a result of anerroneous installation will not be covered bythe warranty.DANGER Prior to installation,visually check if the product hasany defects on it. If so, do nothave it installed. Damagedproducts cause risks for yoursafety.DANGER The product must beinstalled in accordance with alllocal electrical regulations.Preparation of location andelectrical and gas installation forthe appliance is the customer’sresponsibility. Risk of broken glass!Do not put the ceramic hob downon a corner or edge.Before installationThe hob is designed for installation in acommercial worktop. A safety distance mustbe left between the appliance and thekitchen walls and furniture. See figureoverleaf (values in mm).• It can also be used in a free standingposition. Allow a minimum distance of 750mm above the hob surface.• (*) If a cooker hood is to be installedabove the cooker, refer to cooker hoodmanufacturer' instructions regardinginstallation height (min 650 mm)• Remove packaging materials andtransport locks.• Surfaces, synthetic laminates andadhesives used must be heat resistant(100 °C minimum).• The worktop must be aligned and fixedhorizontally.• Cut aperture for the hob in worktop as perinstallation dimensions.Cupboard designCooking appliances generate considerableheat. The layout and materials of themounting cabinet should take account ofthese characteristics.Surfaces and surrounding edgesimmediately adjacent to the hob should beable to withstand temperatures of up to 100°C without delaminating or discolouring.Connection to the power supply must becarried out by a qualified electrician, who willensure that the hob is correctly connectedand safely earthed. The rated current isprinted on the serial number label attachedto the base cover.The hob must be connected to the mainsthrough a double pole isolating switch whichhas a minimum clearance between thecontacts of 3 mm. in both poles. A means fordisconnection must be provided in the fixedwiring.This appliance must be earthedand the manufacturer and theseller do not acceptresponsibility for any damage dueto incorrect installation or electricalconnection.DANGER Risk of electric shock,short circuit or fire by damageof the mains lead!The mains lead must not beclamped, bent or trapped or comeinto contact with hot parts of thehob. If the mains lead is damaged,it must be replaced by a qualifiedelectrician.Installation and connectionThe appliance must be installed inaccordance with local electrical regulations.