Degelman 5900 Series Operator's Manual/parts Catalog

Also see for 5900 Series: Operator's Manual/Parts Catalog

Contents

Degelman 5900 Series Operator's Manual/parts Catalog Manual pdf 18 page image

-14-142582 - 5900 Series (22-March-2013)Fit Up ComponentsExisting Regular SteerWeight Bracket ( Top View)Front View of TractorTractorAxleSpacerSpacerSupersteer Models:• Suitcase weights existing axle weightbracket must be removed to installfront bracket.• Replace existing axle weight bracketbolts with new supplied 1” x 13” and1” x16” bolts, new top spacers, andexisting nuts and lower spacers.• Install new front bracket.All Models:• Install front bracket to front tractorframe with spacers (x2), M20 x 80bolts (outer x4), M20 x 60 bolts (innerx2), M20 lock washers (x6).Regular Steer Models:• Suitcase weights must removed toinstall front bracket.• Remove existing front weight bracketfrom frame, no changes made toaxle.• Install new front bracket.• Weight bracket can be reinstalled onfront plate of new front brkt.• Weights may be reinstalled whenblade is detached but must beremoved whenever blade is mounted.M20 x 80M20 Lock NutM20 x 100M20 Flat WasherFRONT BRACKET INSTALLATIONRADAR BRACKET EXTENSION (Only available on some tractor models)- Existing Radar Bracket is located on right side of the tractor.- This bracket needs to be removed and repositioned usingthe new supplied bracket extension when the new sidebracket (RH) is mounted to the frame.- New hardware is provided to secure the existing bracket tothe new bracket extension.- The rear holes on the side bracket (RH) use the same holesthe radar bracket was previously mounted to.Use Existing RadarBracket & newhardware(see below) Side Bracket(RH)Side Brackethardware781923 -Radar BracketExtension (1)118294 - Bolt, 3/4 x 1-3/4 (2)118509 - Lock Washer, 3/4 (2)118410 - Nut, 3/4 (2)