Degelman PRO-TILL 20 Operator's & Parts Manual
Also see for Pro-till 20: Operator's & parts manualQuick start guideOperator's & parts manualQuick start guideOperator's & parts manual
                                                 | |
Contents
| 
-7-143365 - PRO-TILL 20|26|28 (26-April-2018)NEVER LIFT WINGS!Lift rear sections using the TransportCylinders (3), then fold the wings forwardusing the Wing Cylinders (2).Field to Transport Position OverviewFIELD TO TRANSPORT POSITIONFOLLOW PROCEDURE BELOW:E. When the wing frame rollersare in proper position abovethe transport holders, lightlylower the wings in placeby retracting the Transportcylinders (#3) to gently setthe wings onto the holders.D. When the wings get close to the wing transportholders, you may need to slightly extend theTransport cylinders (#3) so the rollers can reachthe correct position.1”WingTransportHolders3May need toraise over hump3 3IMPORTANT: DO NOT retract the Wing cylinders toraise the wings at this point. Follow proper procedures toprevent possible equipment damage or failure.B. Retract the Transport cylinders (#3), fully raisingthe complete rear section.NOTE: It is important to fully raise the disc framesup as high as possible as it puts the rollers andwheels in the correct position for low transport.A. In field position, fully extend the Depth (#1)cylinders (Wheels & Rollers) to completely raise thedisc frames.2 2C. After raising all the rear sections, retract theWing cylinders (#2) to bring both wings inwardtowards the frame. |
Related manuals for Degelman Pro-till 20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine