Degelman Pro-till 20 Operator's & Parts Manual
Also see for Pro-till 20: Operator's & parts manualQuick start guideOperator's & parts manualQuick start guideOperator's & parts manual
                                          | |
-14-143354 - PRO-TILL (08-September-2017)The PRO-TILL should be carefully prepared forstorage to ensure that all dirt, mud, debris andmoisture has been removed.Follow this procedure when preparing to store:1. Wash the entire machine thoroughly using awater hose or pressure washer to remove alldirt, mud, debris or residue.2. Inspect all parts to see if anything has becomeentangled in them. Remove the entangledmaterial.3. Lubricate hub and spindle grease fittings toremove moisture4. Inspect all hydraulic hoses, fittings, lines andcouplers. Tighten any loose fittings. Replace anyhose that is badly cut, nicked or abraded or isseparating from the crimped end of the fitting.5. Touch up all paint nicks and scratches to preventrusting.6. Select an area that is dry, level and free ofdebris.7. Store in either Transport or Field position.8. Use hydraulic cylinder jack.9. Oil any exposed chrome shafts on the hydrauliccylinders to prevent rusting.STORAGEService & MaintenanceMAINTENANCE CHECKLISTAfter reviewing the Maintenance and HydraulicSafety Information, use the Maintenance Checklistprovided for regular service intervals and keep arecord of all scheduled maintenance:( Initial break-in review. Read full section on pg.8 )A. Before using:1. Read Safety Info. & Operator’s Manual.2. Complete “Pre-Operation Checklist”3. Check all Bolt Tightness.4. Adjust Disc Cutting Depth as outlined inthe “Setting Disc Depth” section.B. After operating for 2 hours:1. Check all hardware. Tighten as required.2. Check all hydraulic system connections.Tighten if any are leaking.Maintenance Check - 10 Hours• Check for worn or damaged parts• Hydraulic fluid leaks• Damaged hoses• Check tire pressure:Tires (382 FLOTRUCK):600/50 R22.5: 58 PSI (400 kPa)Maintenance Check - 50 Hours• Grease hubs & spindles• Check working points & pins• Safety signs cleanAnnually• Bolt tightness• Wheel bearingsIMPORTANT: Safely securePro-Till in winged forwardtransport position whenchanging or servicing discs. |
Related manuals for Degelman Pro-till 20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine