Dekker Vmax Series Installation, Operation & Maintenance Manual
Also see for VMAX LT SERIES: Installation, operation & maintenance manual
                                              | |
Contents
| 
DEKKER Vacuum Technologies, Inc. – Vmax/July 2016 6INTRODUCTIONThe Vmax oil-sealed liquid ring vacuum pump system has been designed to give you safe, reliable trouble-free service, provided some of the basic maintenance guidelines as set out in this manual are followed.Compared to other vacuum pump systems, the Vmax oil-sealed liquid ring vacuum pump system offers theadvantages of no metal-to-metal contact between the impeller and casing. Grease lubricated bearings aremounted external to the pumping chamber, isolated by mechanical shaft seals. This means that the pumprequires no internal lubrication. However, a vacuum pump is a rotating piece of equipment and operatorsmust exercise good judgment and follow proper safety procedures to avoid damage to the equipment orpersonal injury. Please review and follow all instructions in this manual before attempting to install, start oroperate equipment.The Vmax oil-sealed liquid ring vacuum pump system is equipped with a standard DEKKER Controller. TheDEKKER Controller is a microprocessor-based digital controller for use with DEKKER vacuum systems.The controller is designed for flexibility and can be used on one system or multiple systems interactingtogether. The DEKKER Controller provides for system control as well as monitoring of system status.Service functions include display of spare parts list, maintenance schedules, and service history, along withlogging of fault conditions.The DEKKER Controller includes a 4-line large-font liquid crystal display, a durable Lexan membranekeypad, and multiple status LEDs. Communication between controllers is via RS-485 for multi-machinesystems. An Ethernet port provides for remote monitoring and control via TCP/IP protocols and can beenhanced with the use of DEKKER’s OnDek Software. Input and output (I/O) includes 9 digital (24VDC)inputs and 7 dry relay contact outputs. Analog I/O includes two Resistance Temperature Detectors (RTD)inputs, four 0-10VDC/4-20mA inputs, one 0-10VDC output, and one 4-20mA output. Power input to thecontroller is 24VDC.SAFETYAll products offered by DEKKER have been designed and manufactured for safe operation. However, theresponsibility for safe operation rests with those who use and maintain these products. Your safetydepartment should establish a safety program based on OSHA, federal, state and local codes. It is importantthat due consideration be given to hazards which arise from the presence of electrical power, hot liquids,harmful gases and rotating equipment. Proper installation and care of protective devices is essential to safesystem operation. These safety procedures are to be used in conjunction with the instructions contained inthis manual. |
Related manuals for Dekker VMAX LT SERIES
Dekker VMAX SERIES Installation, Operation & Maintenance Manual
Dekker Vmax Installation, Operation And Maintenance Manual
Dekker Maxima-K 1 Series Installation, Operation And Maintenance Manual
Dekker HullVac HV55A Installation, Operation & Maintenance Manual
Dekker AquaSeal Installation & Operation Manual
Dekker RVL007 Instruction Manual
manualsdatabase
Your AI-powered manual search engine