Delfield HH02 Specifications

Delfield HH02 Specifications Manual pdf 1 page image

Short Form SpecificationsCabinet top is constructed of 16-gauge stainless steel with all cornerswelded and polished and reinforced with heavy-gauge, concealed galvanizedsteel channels. Lid is 18-gauge stainless steel, insulated and fitted with aperimeter gasket. Lid is attached with stainless steel pivot hinges.Cabinet sides are 20-gauge stainless steel and exterior bottom is 12-gaugegalvanized steel. Removable service panel in rear of unit is stainless steeland louvered for ventilation of the motor compartment. Unit to be equippedwith 5.00" (12.7cm) diameter, ball bearing, polyolefin casters mounted in adiamond pattern; two shall swivel and include brakes, the other two are fixed.Unit includes non-marking, gray rubber wrap-around bumpers and a push-pullhandle.Heated interior compartment is insulated. Self-leveling mechanism isfield-adjustable by adding or removing stainless steel extension springson the perimeter of the vertical side channels. Mechanism is removable.The dish carrier has 16-gauge galvanized steel channels with a remov-able stainless steel top plate.Unit has its own forced air convection heating system consisting of a2600W (HH-02) or 3200W (HH-04) heating element and fan motor. Fanmotor is located outside the heated compartment. Temperature is con-trolled by two thermostats. Unit can be adjusted to heat plates (approxi-mately 170°F [77°C]) or metal bases (approximately 250°F [121°C]) withthe use of an internal toggle switch. Unit includes ON/OFF position switchand two indicator lights which indicate temperature mode selection. A 8'(2.4m) 3-wire grounded electrical supply cord with NEMA 6-20P plug ispermanently attached to the bottom of the cabinet.DANGER: Wax filled & plastic pellet bases should not be heated in theseunits.Optional Accessories and Modifications• Special voltages (consult factory)Model HH02Mobile Heated Plate & Base DispensersPROJECTITEM #QUANTITY DATEAPPROVALHH02/HH04®®The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.comDelfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

/ 2

Related manuals for Delfield HH02