Project __________________________________Item ____________________________________Quantity ________________________________CSI Section 11400Approved _______________________________Date ____________________________________980 S. Isabella Rd.Mt. Pleasant, Michigan 48858 Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619 www.delfield.comShelleymatic®by DelfieldSpecificationsStandard Features Options &AccessoriesCabinet top and corners to be 16-gaugestainless steel1” IPS drainUnits insulated with foamed in placeenvironmentally friendly, Kyoto ProtocolCompliant, Non ODP (Ozone DepletionPotential), Non GWP (Global WarmingPotential) polyurethaneUnits to have sliding stainless steel lids withrecessed handleSelf-leveling mechanisms shall beadjustable by adding and removingstainless steel extension springs locatedinside the elevator housingDispenser platform carrier shall be 18-gauge stainless steel and removable forcleaning6” adjustable stainless steel legsRefrigeration system shall be HFC-134ArefrigerantExpansion valve and pressure control9’ cord and plugOne year parts and 90 day labor standardwarranty•••••••••••N6-1313-34 6 crate capacity, 34” heightN6-1313-36 6 crate capacity, 36” heightN10-1313-34 10 crate capacity, 34” height•••N10-1313-36 10 crate capacity, 36” heightN14-1313-34 14 crate capacity, 34” heightN14-1313-36 14 crate capacity, 36” height•••ModelsN6/N10/N14Free-Standing Self-Contained Milk Or Beverage DispensersN6/N10/N14 Free-Standing Self-Contained Milk Or Beverage Dispensers4.00” (10.2cm) diameter swivelcasters (two locking) with cornerbumpers (adds 1.75” [4.4cm]to overall length and depth andreduces overall height by 1.00”[2.5cm])Wrap-around bumpers (adds 1.75”[4.4cm] to overall length anddepth)Lid locking deviceSpecial voltagesDial or digital style thermometer•••••N10-1313-36Exterior sides shall be 20-gauge stainless steel. Top and cornersupports shall be 16-gauge stainless steel, welded, ground andpolished into one integral unit.Interior liner shall be water-tight and constructed of 22-gaugestainless steel with a 1.00” (2.54cm) I.P.S. drain. Unit shall beinsulated with high-density, foamed-in-place environmentallyfriendly, Kyoto Protocol Compliant, Non ODP (Ozone DepletionPotential), Non GWP (Global Warming Potential) polyurethaneinsulation with a non-conductive top breaker strip. Refrigeratedcompartment is equipped with drain plumbed to a drain valvelocated at the bottom of the counter. Each opening shall havea stainless steel sliding lid recessed handles. Three stainlesssteel louvers shall be installed in the end and sides of thecabinet to allow proper air flow to the condensing unit.Each self-leveling mechanism shall be field adjustable byadding or removing stainless steel extension springs in theelevator housing inside the unit. The elevators shall beconnected by removable platform carriers constructed of 18-gauge stainless steel.Refrigeration system shall use HFC-134a refrigerant.Refrigerant flow shall be controlled by an expansion valve.Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperaturewith lids closed for storage. Refrigeration system shall becontrolled by a pressure control, located near the condensingunit.Electrical connections shall be 115 volt, 60 cycle, single phase.Unit shall have a 9’ (2.7m) long electrical cord and NEMA 5-15Pplug. Exterior has an ON/OFF switch.Legs: Unit shall be mounted on 6.00” (15.2cm) high adjustablestainless steel legs.NOTE: This equipment is intended for storage and /or displayof pre-packaged or bottled products only.