Finding InformationLoading Envelopes Identifying the Location of Paper JamsPrinting the Printer Settings Page1 In the operator panel, press the (Menu) button.2 Ensure that Report/List appears, and then press the button.3 Ensure that Printer Setting appears, and then press the button.The printer settings page is printed.Load envelopes in the printer as shown below:NOTE: When you print on envelopes, be sure to specify the envelope settingon the printer driver. If not specified, the print image will be rotated 180degrees.Envelope#10, DL, or MonarchC5The paper jams may occur at any of the locations shown below:To prevent DL and Monarch from being wrinkled, they are recommended to beloaded with the print-side facing up, flap opened, and facing you.CAUTION: To avoid permanent damage to your printer, do not attempt to clear paperjams using any tools or instruments.1 Output Tray2 Transfer Belt3 Fuser Release Lever4 Rear Cover5 Front Cover6 Multipurpose Feeder (MPF)For more information, see the following documentsavailable on theDrivers and Utilities disc.•Setup GuideSetup instructions for printer hardware. Access tosoftware and drivers.•User’s GuideAdditional information about printer components,paper jam clearance, and consumable replacement.Cleaning the PrinterVertical blanks appearing in printsÆ See "Maintaining Your Printer" in theUser's GuideAn alert for the CTD sensor appearsÆ See "Maintaining Your Printer" in theUser's GuideTroubleshootingClearing jamsÆ See "Clearing Jams" in theUser'sGuidePrint quality and other printingproblemsÆ See "Troubleshooting" in theUser'sGuideCommon error messagesÆ See "Understanding PrinterMessages" in theUser's GuideReplacing TonersTo replace tonersÆ See "Maintaining Your Printer" intheUser's Guidesupport.dell.comMultipurpose Feeder (MPF)Multipurpose Feeder (MPF)Priority Sheet Inserter (PSI)Priority Sheet Inserter (PSI)Priority Sheet Inserter (PSI)Multipurpose Feeder (MPF)12 36 54