Understanding the Printer Menus 223NOTE: When you use the USB connection and do not use the wireless connection,you need to disable the wireless LAN.USB SettingsUse the USB Settings menu to change printer settings affecting a USBport.NOTE: Values marked by an asterisk (*) are the factory default menu settings.USB PortPurpose:To change the USB settings on your printer. The change becomes effectiveafter the printer is turned off and then on.Values:System SettingsUse the System Settings menu to configure the power saving mode,time-out time, job log auto print, mm/inch setting, default paper size setting,and low toner alert setting.NOTE: Values marked by an asterisk (*) are the factory default menu settings.PowerSaver TimePurpose:To specify the time for transition to power saver mode.Options:Enable* Enables the USB interface.Disable Disables the USB interface.Sleep 5min.* Specifies the time taken by the printer before itenters Sleep mode after it finishes a job.5–30min.Deep Sleep 6min.* Specifies the time taken by the printer before itenters Deep Sleep mode after it goes into Sleepmode.1–6min.
