34 Understanding the Printer SoftwareWindows Me:1 Make sure that the printer is connected to your computer and powered on.2 When the hardware wizard screen appears, Automatic search for a better driver for your device(Recommended) is selected.3 Insert thedrivers and utilities CD and click Next. The driver installs.4 Click Finish, and a second wizard appears.5 If the CD menu screen appears above the wizard, click New Hardware Wizard from the Windowstaskbar.6 Click Next. Automatic search for a better driver for your device (Recommended) is selected.7 Click Next. The driver installs.8 Click Finish.If the CD software installation menu does not appear, follow these instructions:1 Click Start → Run → Browse to D: (where “D” is your CD drive).2 Select Setup, click Open, and then click OK.3 Click Personal Installation.4 Click Typical Installation or Custom Installation. (If you choose Custom Installation, select from theavailable software options and click Next.)5 After installation, you may click Print Test Page.6 Click Finish.Assigning an IP AddressBefore using the printer on the network, you must set an IP address, subnet mask, and gateway for theprinter. To automatically set the IP address, a DHCP or BOOTP server must exist on the network.To configure the IP address manually, you can use the supplieddrivers and utilities CD. Print theNetwork Configuration page of the printer to see the current network configuration and MAC address.You will need this information to configure the printer for the network.1 Make sure that the printer is connected to your network and powered on. Close all unnecessaryprograms.2 Insert thedrivers and utilities CD.3 If required, press the Language button to select a language.4 Select SetIP Address Utility. The list of printers available in the network displays.5 Select the printer you want to assign an IP to. The printer’s default IP address is on the Configurationpage.6 After you assign the IP address for the printer, exit the program.
