Dell 2145cn Service Manual

Also see for 2145cn: User guide

Contents

Dell 2145cn Service Manual Manual pdf 104 page image

Alignment and Troubleshooting4-40Depth 1 Depth 2 Depth 3 Depth 4Machine Test Fuser OffsetStandBy Temp. [-20-0]:0*,-5,-10,-15,-20Run Temp. [-20-0]:0*,-5,-10,-15,-20101-185mm Temp. [-20-0]:0*,-5,-10,-15,-20186-216mm Temp. [-20-0]:0*,-5,-10,-15,-2090 gms Temp. [-20-0]:0*,-5,-10,-15,-20Bond Temp. [-20-0]:0*,-5,-10,-15,-20OHP Temp. [-20-0]:0*,-5,-10,-15,-20Cardstock Temp. [-20-0]:0*,-5,-10,-15,-20Env. Temp. [-20-0]:0*,-5,-10,-15,-20Label Temp. [-20-0]:0*,-5,-10,-15,-20ReportAll ReportProtocolConfigurationSupplies InfoError InfoUsage PageComponentCheckService Support■ Data SetupSEND LEVELYou can set the level of the transmission signal. Typically, the Tx level should be under -12 dBm.Caution :DIAL MODEThis function can choose dial method.*Default : Dial(Dial/Pulse)MODEM SPEEDYou can set the maximum modem speed.Communication is done with modem speed automatically set at lower speed when communicating with aslower speed modem since communication is done on the standard of the side where modem speed is lowfor transmission/reception. It is best set 33.6Kbps as default setting.ERROR RATEWhen the error rate is about exceed the set value, the Baud rate automatically adjusts to 2400 bps.This ensures that the error rate remains below the set value.You can select the rate between 5% and 10%.The Send Fax Level is set at the best condition in the shipment from factory.Never change settings arbitrarily.