|
Fast!UTIL A-1A P P E N D I X AFast!UTILIntroductionThis appendix provides detailed configuration information for advanced users who want to custom-ize the configuration of the QLA2xxx board and the connected devices.The board can be configured using Fast!UTIL. Access Fast!UTIL by pressing - during the QLA2xxx board BIOS initialization (it may take a few seconds for the Fast!UTIL menu toappear). If you have more than one QLA2xxx board, Fast!UTIL asks you to select the board youwant to configure. After changing the settings, Fast!UTIL reboots your system to load the newparameters.CAUTION: If the configuration settings are incorrect, your QLA2xxx board will not functionproperly.The following sections describe the Fast!UTIL options.Configuration SettingsThe first selection on the Fast!UTIL Options menu is Configuration Settings. These settings con-figure the Fibre Channel (FC) devices and the QLA2xxx board to which they are attached.Host Adapter SettingsFrom the Configuration Settings menu in Fast!UTIL, select Host Adapter Settings. The default set-tings for the QLA2xxx host adapter board are listed in table A-1 and described in the followingparagraphs.Table A-1. Host Adapter SettingsSetting Options DefaultHost Adapter BIOS Enabled or Disabled DisabledFrame Size 512, 1024, 2048 2048Loop Reset Delay 0-15 seconds 5 secondsAdapter Hard Loop ID Enabled or Disabled Enabled
|
