Dell 2350 User Manual

Also see for 2350 - Wireless WLAN Broadband Router: Installation instructions Owner's manual Setup guide Installation guide Specifications

Enable DHCP Server FunctionsBy default, the Wireless 2350 is set to function as a DHCP server. If you are installing the uniton an existing network that already has a DHCP server or simply do not want the Wireless2350 to function as the network's DHCP server, click to deselect Enable DHCP ServerFunctions to disable the DHCP server function.IP Address Pool RangeThe IP Address Pool Range section provides a means of controlling a low and high value forthe IP addresses on a network. Use the indicated fields to define the range of IP addressesyou would like the Wireless 2350 to provide to DHCP clients. The valid range of numbers youshould enter is between 1 and 254.The lease time is the amount of time a user will be allowed to use the IP address assigned bythe DHCP server. You may specify the lease time that DHCP server offers for the client to usethe IP address. This setting is especially useful on campuses or other environments whereusers change frequently.IP Address ReservationSpecific IP addresses may also be reserved for particular devices in a network. The IPAddress Reservation fields allow you to reserve up to 20 IP addresses for a specific system.The MAC Address field is the physical address of the network card on the client computer.Use the input fields under IP Address to indicate the IP address for those devices that shoulduse a manually defined IP address.Time ZoneTime Zone