Dell 2350 User Manual

Also see for 2350 - Wireless WLAN Broadband Router: Installation instructions Owner's manual Setup guide Installation guide Specifications

5. Enter the URL that you want to allow or deny the access in the Web Site Restrictionsfield.6. Click to select Allow or Deny access to these web sites.7. Enter the web keywords to deny traffic with the same keywords8. Click the Submit button to store the changes.Advanced Filtering allows user to setup a more complicated rule to filter out unwanted traffic.Click ADD button to setup source IP, Destination IP, IP protocol, TCP port, and UDP port.The figure above shows DNS server status. User is able to see host name, IP address, andSource.For user hosting service with a dynamic IP from ISP’s DHCP server, Dynamic DNS allowsserver to match ever changing IP to work station which the service is provided. Check “EnableDynamic DNS” box and enter User Name, Password, and Host Name to register with Server.Access Control SettingsThe Access Control Settings feature allows you to control which local client computer can orcan not access the network through the router. The Wireless 2350 by default allows any localclient computer to access the network. There are two tables for Access Control Settings, GrantAccess Table and Deny Access Table. Each table is able to support up to 32 entries. Only onetable can be active at a time. Selecting the checkbox for Grant Access Table will disable theDeny Access Table and vice versa. This MAC Access control settings apply to wirelessclients only and not to wired clients.Access Control Settings