Dell 2408WFP User Manual

Also see for 2408WFP - UltraSharp - 24" LCD Monitor: Setup guide Datasheet Specifications

Dell 2408WFP User Manual Manual pdf 35 page image

Attaching the soundbarRemoving the StandComplete the following steps to remove the stand:1. Rotate the stand to allow access to the stand release button.2. Press and hold the stand release button.3. Lift the stand up and away from the monitor.Back to Contents Page1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.2. Slide the Soundbar to the left until it snaps into place.3. Connect the Soundbar with the DC power connector.4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.NOTICE: Do not use with any device other than Dell SoundbarNOTE: Soundbar Power Connector +12V DC output is for optional Soundbar only.NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.