108 Removing and Installing Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 3 Slide the drive into the drive bay until the drive clicks into position.4 Connect the power cable to the drive and the CD/DVD cable to the drive and system board.5 If you are installing a new CD/DVD drive rather than replacing a drive, remove the frontpanel inserts.6 Check all cable connections, and fold cables out of the way to provide airflow for the fan andcooling vents.7 Close the computer cover.NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in tothe computer.8 Connect your computer and devices to their electrical outlets, and turn them on.See the documentation that came with the drive for instructions on installing any softwarerequired for drive operation.9 Enter system setup (see page 116) and select the appropriate Drive option.10 Verify that your computer works correctly by running the Dell Diagnostics (see page 56).power cableCD/DVD drivesystem board
