96 Removing and Installing Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Installing a Hard Drive1 Unpack the replacement hard drive, and prepare it for installation.2 Check the documentation for the drive to verify that the drive is configured for yourcomputer.3 If your replacement hard drive does not have the hard drive bracket attached, remove thebracket from the old hard drive by unsnapping it from the drive.4 Snap the hard drive bracket onto the replacement hard drive.5 Install the hard drive into the computer by sliding the drive into place until you feel it clickinto place.hard drivehard drive bracket
