If the regulatory label includes the following marking, your device is a Class A product:Class B ITEThis is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If thisequipment is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according tothe instruction manual.VCCI Class B ITE Regulatory MarkIf the regulatory label includes the following marking, your device is a Class B product:Polish Center for Testing and Certification NoticeThe equipment should draw power from a socket with an attached protection circuit (a 3-prong socket). All equipment that works together (computer, monitor,printer, and so on) should have the same power supply source.The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value nolarger than 16 amperes (A).To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipmentand easily accessible.A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standard PN-EN 55022.BSMI Notice (Taiwan Only)
