Security FeaturesDell 7130cdn Professional Color PrinterSystem Administrator Guide58Configuring the SNMP ColorTrack ListTo set up a list of hosts that are authorized to access the printer using SNMP:1. Launch your Web browser.2. Enter your printer’s IP address in the browser Address field. For details, see Finding thePrinter’s IP Address on page 13.3. Click Properties.4. On the left navigation pane, select the Protocol folder.5. Select SNMP.6. If prompted, enter your Admin or Key User name and password.7. Enter up to 10 host IP addresses in the Host Access List field of the SNMP ColorTrack Listbox. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use anasterisk (*) to represent a group of numbers (e.g., 13.62.156.*).8. Click the Save Changes button.See also:ColorTrack Lists on page 40Disabling SNMPIf you are not using SNMP, disable it to prevent unauthorized access through applications thatuse these protocols. If you disable SNMP, the following driver features are also disabled:• Status Monitor alerts• Walk-Up ® Installer• Smart Trays• Online Diagnostics• Auto supplies ordering• Consumable levels• Warning and error status• Synchronization with installed options, such as hard drive, memory, and extra traysTo disable SNMP:1. Launch your Web browser.2. Enter your printer’s IP address in the browser Address field. For details, see Finding thePrinter’s IP Address on page 13.3. Click Properties.4. On the left navigation pane, select the Protocols folder.5. Select SNMP.6. If prompted, enter your Admin or Key User name and password.7. Click the Disable SNMP Now button.8. Click the Save Changes button.