Dell 7330dn - Laser Printer B/W System Administration Manual

Also see for 7330: User guide Quick use guide Install manual Installation guide Image Processor Board Instruction

Contents

Dell 7330dn - Laser Printer B/W System Administration Manual Manual pdf 49 page image

Configuring SNMPDell 7330 Mono Laser Printer System Administrator Guide4-19Configuring SNMP v3When configuring SNMP v3, you can set up: Administrative, Key, Any User, and Driver accounts with Privacy and AuthenticationKeys associated with each account. SNMP user read and write access. An access control list that limits SNMP printer access to the specific hosts. SeeConfiguring the SNMP Access Control List on page 4-21.To configure and enable SNMP v3:1. Launch your web browser.2. Enter the printer’s IP address in the browser Address field.3. Click Properties.4. On the left navigation panel, select the Protocols folder.5. Select SNMP.6. If prompted, enter your Admin or Key User name and password.7. On the SNMP Configuration page, click the Configure SNMP v3 button.8. Click the Configure Account(s) button. A series of pages displays that enable you toconfigure SNMP v3 and the Administrative User, Key User, and Any User/Driversettings. The first page displays Administrative User account information after the accounthas been created.9. Do one of the following: To create the Administrative User account and to enable SNMP v3, enter a user nameor accept the default name admin and then click the Create button. To configure the Key User and other account settings, click the Next button. To delete the Administrative User account and disable SNMP v3, click theDelete button.Note: Deleting the Administrative User account and disabling SNMP v3 also deletes allother accounts, including the Key User and Any User settings.The Administrative User Account Settings User Name: The Administrative User account name defined on the Configure SNMP v3:Administrative User Account page. Authentication Protocols: The protocol associated with the Authentication Key; selectedon the Configure SNMP v3: Administrative User Account page. Authentication Key: The Authentication Key defined on the Configure SNMP v3:Administrative User Account page is displayed as a row of asterisks (*) here. Privacy Protocol: The protocol associated with the Privacy Key; selected on theConfigure SNMP v3 Administrative User Account page. Privacy Key: The Privacy Key defined on the Configure SNMP v3: AdministrativeUser Account page is displayed as a row of asterisks (*) here. MIB Access: The Administrative User account’s MIB access permissions, which are setto Read/Write by default.