Dell 7HT3R Installation And Service Manual

Rear view of the systemFigure 6. Rear view of the systemTable 6. Rear view of the systemItem Ports, panels, or slots Icon Description1 PCIe expansion card riser1N/A Enables you to connect PCI Express expansion cards.2 BOSS riser N/A Enables you to connect BOSS card.3 PCIe expansion card riser2cN/A Enables you to connect PCI Express expansion cards.4 Power supply unit (PSU 1) Indicates the PSU.5 Power supply unit (PSU2)Indicates the PSU.6 System identificationbuttonPress the system ID button:● To locate a particular system within a rack.● To turn the system ID on or off.To reset iDRAC, press and hold the button for 16 seconds.NOTE:● To reset iDRAC using system ID, ensure that the system IDbutton is enabled in the iDRAC setup.● If the system stops responding during POST, press and holdthe system ID button (for more than five seconds) to enterthe BIOS progress mode.7 VGA port Enables you to connect a display device to the system.8 OCP NIC port N/A This port supports OCP 3.0.9 USB 3.0 port This port is USB 3.0-compliant.10 USB 2.0 port This port is USB 2.0-compliant.11 iDRAC dedicated port Enables you to remotely access iDRAC. For more information, seethe iDRAC User’s Guide at www.dell.com/poweredgemanuals.Dell EMC PowerEdge R650xs system overview 13