Dell 7HT3R Installation And Service Manual

Table 1. Features available on the front of the systemItem Ports, panels, andslots Icon Description1 Left control panel N/A Contains the system health, system ID, status LED, and theiDRAC Quick Sync 2 (wireless) indicator.NOTE: The iDRAC Quick Sync 2 indicator is available onlyon certain configurations.● Status LED: Enables you to identify any failed hardwarecomponents. There are up to five status LEDs and an overallsystem health LED (Chassis health and system ID) bar. Formore information, see the Status LED indicators section.● Quick Sync 2 (wireless): Indicates a Quick Sync enabledsystem. The Quick Sync feature is optional. This featureallows management of the system by using mobile devicescalled as OpenManage Mobile (OMM) feature. Using iDRACQuick Sync 2 with OpenManage Mobile (OMM) aggregateshardware or firmware inventory and various system leveldiagnostic and error information that can be used introubleshooting the system. For more information, see theIntegrated Dell Remote Access Controller User's Guideavailable at https://www.dell.com/idracmanuals.2 Optical drive (optional) N/A One optional slim SATA DVD-ROM drive or DVD+/-RW drive.3 VGA port Enables you to connect a display device to the system.4 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port,and the iDRAC Direct status LED.5 Information tag The Information tag is a slide-out label panel that containssystem information such as Service Tag, NIC, MAC address,and so on. If you have opted for the secure default accessto iDRAC, the Information tag also contains the iDRAC securedefault password.6 Drive N/A Enables you to install drives that are supported on your system.Figure 2. Front view of 8 x 2.5-inch drive systemTable 2. Features available on the front of the systemItem Ports, panels, andslots Icon Description1 Left control panel N/A Contains the system health, system ID, status LED, and theiDRAC Quick Sync 2 (wireless) indicator.NOTE: The iDRAC Quick Sync 2 indicator is available onlyon certain configurations.● Status LED: Enables you to identify any failed hardwarecomponents. There are up to five status LEDs and an overallsystem health LED (Chassis health and system ID) bar. Formore information, see the Status LED indicators section.Dell EMC PowerEdge R650xs system overview 9