Dell 88HPH Owner's Manual

Steps1. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot 1 (M.2 PCIe SSD 1).2. Slide the M.2 2230 solid-state drive into the solid-state drive slot 1 (M.2 PCIe SSD 1) on the system board.3. Replace the screw (M2x3.5) that secures the M.2 2230 solid-state drive to the system boardNext steps1. Install the side cover.2. Follow the procedure in After working inside your computer.Removing the M.2 2280 solid-state drive from slot 0Prerequisites1. Follow the procedure in Before working inside your computer.2. Remove the side cover.About this taskNOTE: Depending on the configuration ordered, your computer may have an M.2 2230 or an M.2 2280 solid-state driveinstalled in solid-state drive slot 0 (M.2 PCIe SSD 0) on the system board.NOTE: This procedure is applicable for computers where an M.2 2280 solid-state drive is installed in solid-state drive slot 0(M.2 PCIe SSD 0) on the system board.The following image(s) indicate the location of the M.2 2280 solid-state drive in slot 0 and provides a visual representation ofthe removal procedure.Removing and installing Customer Replaceable Units (CRUs) 39