AdvancedDefault: Software ControlledIntel(R) Software Guard Extensions allocated memorysizeDisplays the allocated memory size for Intel Software GuardExtensions.BIOS Recovery from Hard Drive Enable the user to recover from certain corrupted BIOSconditions from a recovery file on the user primary harddriveDefault: EnabledBIOS Auto-Recovery Enable or disable BIOS Auto-Recovery.Default: DisabledSupportAssist System ResolutionAuto OS Recovery Threshold Control the automatic boot flow for SupportAssist SystemResolution Console and for Dell OS Recovery tool.Default: 2SupportAssist OS Recovery Enable or disable SupportAssist OS recovery.Default: EnabledIntel(R) Rapid Storage TechnologyNon-RAID Physical Disks Displays the disk using the Intel(R) Rapid StorageTechnology.Table 7. System setup options—Security menuSecurityUnlock Setup Status Displays if the setup status is unlocked.Admin Password Status Displays if the administrator password is clear or set.Default: Not setSystem Password Status Displays if the system password is clear or set.Default: Not setHDD Password Status Displays if the HDD password is clear or set.Default: Not setAdmin Password Enables you to set the administrator password. Theadministrator password controls access to the system setuputility.System Password Enables you to set the system password. The systempassword controls access to the computer at boot.HDD password Enables you to set, change or delete the hard-disk drivepassword.Password Change Enables you to permit or deny system password or HDDpassword changes.Default: PermittedComputrace Enable or disable the BIOS module interface of theoptional Computrace Service from Absolute Software.Default: ActivateFirmware TPM Enables you to enable or disable the firmware TPMfunction.Default: EnabledPPI Bypass for Clear Command Enables you to control the TPM Physical Presence Interface(PPI). When enabled, this setting will allow the OS to skip64