Dell Alienware m15 R2 Service Manual

Also see for Alienware m15 R2: Setup and Specifcations Service manual

Contents

Removing and installing componentsRecommended toolsThe procedures in this document may require the following tools:• Philips screwdriver #1• Flat-head screwdriver• Plastic scribeScrew listNOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screwtype is restored when the component is replaced.NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface whenreplacing a component.NOTE: Screw color may vary with the configuration ordered.Table 1. Screw listComponent Secured to Screw type Quantity Screw imageBase cover Palm-rest assembly M2.5x5 2M.2 connector shield System board M2x4.5 1M.2 2230 solid-statedriveM.2 2230 mountingbracketM2x3 1 per M.2 2230 solid-state driveM.2 2230 mountingbracketPalm-rest assembly M2x3 1 per M.2 2230 solid-state driveM.2 2280 solid-statedrivePalm-rest assembly M2x3 1 per M.2 2280 solid-state driveBack cover Palm-rest assembly M2.5x5 2Wireless-card bracket Left I/O-board M2x3 1Display assembly Palm-rest assembly M2.5x5 6Battery • Palm-rest assembly• System board• Left I/O-board• Right I/O-boardM2x4.5 6Keyboard-backlightcableKeyboard-controllerboardM2x1.9 28