w w w . d e l l . c o m | s u p p o r t . e u r o . d e l l . c o m10 System Infor mation GuideObserve the following safe-handling guidelines to prevent damage toyour device:• When setting up the device for work, place it on a level surface.• You can put your device through an X-ray security machine, butnever put your device through a metal detector. If you have thedevice checked by hand, be sure to have a charged batteryavailable in case you are asked to turn on the device.• Protect your device, battery, and hard drive from environmentalhazards such as dirt, dust, food, liquids, temperature extremes,and overexposure to sunlight.• When you move your device between environments with verydifferent temperature and/or humidity ranges, condensation mayform on or within the device. To avoid damaging the device,allow sufficient time for the moisture to evaporate before usingthe device.NOTICE: When taking the device from low-temperature conditions intoa warmer environment or from high-temperature conditions into a coolerenvironment, allow the device to acclimate to room temperature beforeturning on power.• When you disconnect a cable, pull on its connector or on itsstrain-relief loop, not on the cable itself. As you pull out theconnector, keep it evenly aligned to avoid bending any connectorpins. Also, before you connect a cable make sure both connectorsare correctly oriented and aligned.• Handle components with care.CAUTION: Safety Instructions (continued)