Basic faxing582. Menu overview and basic setup5 Press (Start) on the control panel. The machine starts to scan andsend the fax to the destinations.• If you want to send a fax directly from your computer, use Dell NetworkPC Fax (see "Sending a fax in the computer" on page 173).• When you want to cancel a fax job, press (Stop/Clear) before themachine starts transmission.• If you used the scanner glass, the machine shows the message asking toplace another page.Sending a fax manuallyPerform the following to send a fax using (On Hook Dial) on the controlpanel. If your machine is a handset model, you can send a fax using the handset(see "Features" on page 6).1 Place a single document face down on the document glass, or load thedocuments face up into the document feeder (see "Loading originals" onpage 43).2 Select (fax) on the control panel.3 Adjust the resolution and the darkness to suit your fax needs (see"Adjusting the document settings" on page 59).4 Press On Hook Dial on the control panel or lift the handset.5 Enter a fax number using the number keypad on the control panel.6 Press (Start) on the control panel when you hear a high-pitched faxsignal from the remote fax machine.Sending a fax to multiple destinationsYou can use the multiple send feature, which allows you to send a fax to multiplelocations. Originals are automatically stored in memory and sent to a remotestation. After transmission, the originals are automatically erased from memory(see "Features" on page 6).You cannot send faxes with this feature if you chosen super fine as an optionor if the fax is in color.1 Place a single document face down on the document glass, or load thedocuments face up into the document feeder (see "Loading originals" onpage 43).2 Select (fax) on the control panel.3 Adjust the resolution and the darkness to suit your fax needs (see"Adjusting the document settings" on page 59).4 Select (Menu) > Fax Feature > Multi Send on the control panel.
