Dell Broadcom NetXtreme Family of Adapters User Manual

Also see for Broadcom NetXtreme Family of Adapters: Manual Installation User guide

Dell Broadcom NetXtreme Family of Adapters User Manual Manual pdf 107 page image

Using Expert ModeUse Expert Mode to create a team, modify a team, add a VLAN, and configure LiveLink for a Smart Load Balance and Failover and SLB (Auto-FallbackDisable) team. To create a team using the wizard, see Using the Broadcom Teaming Wizard.To set the default Teaming Mode, select Options from the Tools menu. In the Options window, click the General tab, then select Expert Mode orWizard Mode (the default is Wizard Mode).Creating a TeamNOTE: Enabling Dynamic Host Configuration Protocol (DHCP) is not recommended for members of an SLB type of team.1. Click the Team Management button at the bottom of the BACS 3 window, or from the View menu, select Navigate, then Team Management.2. Click Teams at the top of the Team Management pane, or select one of the listed devices in the "Unassigned Adapters" section.3. From the Team menu, select Create a Team, or right-click one of the devices in the "Unassigned Adapters" section and select Create a Team.This option is not available if there are no devices listed in the "Unassigned Adapters" sections, which means all adapters are already assigned toteams.4. Click Expert Mode.NOTE: If you want to always use Expert Mode to create a team, click Default to Expert Mode on next start.