Dell Broadcom NetXtreme Family of Adapters User Manual

Also see for Broadcom NetXtreme Family of Adapters: Manual Installation User guide

Dell Broadcom NetXtreme Family of Adapters User Manual Manual pdf 178 page image

Use names such as BASP1 for TEAM 1, BASP2 for TEAM 2, BASP3 for TEAM 3 and BASP4 for TEAM 4.When you modify a team, you may need to reboot after reinitialization for the changes to take effect.Repeat steps 22 through 27 to configure an additional physical driver and to configure additional frame types. Theconfiguration can be viewed in the View Configuration - All INETCFG Commands console.SNMP AgentThis SNMP agent is designed to support the configuration information pertaining to the Broadcom BASP driver for NetWare.InstallationWhen the BASP.LDI driver is installed using nwconfig or nwinstall, the driver automatically copies the BASP.LAN,bmapi.nlm, and bsnmp.nlm files to the system.After you configure and run the BASP and bind the BASP to network adapters, load the Broadcom SNMP InstrumentationAgent (BSNMP) as follows:From the NetWare Server console command line interface, type:load bmapi.nlmload bsnmp.nlmSNMP ObjectsBASP SNMP objects are provided in the BASP-Config.MIB file, which is on your driver source media. The snmpget andsnmpgetnext commands can be used to receive the BASP SNMP objects such as:snmpget localhost public BASP-Config-MIB::btTeamNumbersnmpgetnext localhost public BASP-Config-MIB::btTeamNumberNOTE: Only BASP configuration information is available through SNMP in NetWare. Statistical events are only available forthe base adaptersFilesBASP.LANbmapi.nlmbsnmp.nlmBASP-CONFIG.MIBPlease read all Restrictions and Disclaimers.Back to Contents Page

/ 178

Related manuals for Dell Broadcom NetXtreme Family of Adapters