ConnectX®-2 Dual Port VPI I/O Card for Dell C6100 Rev 1.0Mellanox Technologies 23Appendix A: SpecificationsA.1 Board Mechanical Drawing and DimensionsThe ConnectX-2 I/O card mechanical drawing is depicted in Figure 14.Figure 14: Mechanical DrawingNote: All dimensions are in millimeters.J1 is the flash jumper.J2 is the I2C Connector.J2J3J5 J4J6Q1Q2U9U1U13 H1 H2H3J1L14U8U10U3U5 U6 U7111.9034.40 59.70 16.6079.3010.8063.9010.0357.152.604.60I2C interface J2Flash Jumper J1

user manual

Mellanox Technologies

Table 1: Revision History Table

Installation Instructions

Overview

Finding the GUID/MAC and Serial Number on the Adapter Cards

I/O Card Interfaces

LED Assignment

EEPROM VPD

driver software

I/O Card Installation

Figure 5: Installation Kit Parts

Figure 6: Removing From the Server

Figure 8: Install the Plastic Leg onto the Board

Safety Warnings

Cables and Modules

Removing a Cable from the Card

Flash

Figure 15: QSFP Connector Male and Female Views

Dell ConnectX MCQH29-XDR User Manual

ConnectX MCQH29-XDR