ConnectX®-2 Dual Port VPI I/O Card for Dell C6100 Rev 1.0Mellanox Technologies 7About this ManualThis User Manual describes ConnectX-2 Dual Port VPI I/O cards for the Dell C6100 chassis.It provides details as to the interfaces of the board, specifications, required software and firmwarefor operating the cards, installation instructions, and relevant documentation.Intended AudienceThis manual is intended for the installer and user of the I/O cards.The manual assumes basic familiarity with the Infiniband ® architecture specifications.Related DocumentationTable 2 - Documents ListOnline Resources• Mellanox Technologies Web pages: http://www.mellanox.com• Dell Support Web pages: http://support.dell.comDocument ConventionsWhen discussing memory sizes, MB and MBytes are used in this document to mean size in megabytes. The use of Mb or Mbits (small b) indicates size in mega bits.InfiniBand® Architecture Specification Volume 1 Release 1.2 and Volume 2 release1.2.1– Infiniband Architecture Specifications DescriptionsPCI Express Base 2.0 Specification (1.1 compatible)PCI Local Bus Specification Rev 2.3These symbols indicate a situation, status, or condition that may cause harmto people or damage to the equipment.