Dell DELL10KWOLHVUS User Manual

Also see for DELL10KWEBM: Getting started

Contents

Dell DELL10KWOLHVUS User Manual Manual pdf 58 page image

58 | OperationControlling Load Segments Through the DisplayTo control the load segments through the display:1 Press the button for longer than one second to go to the main menu selection and scroll down tothe Control menu using the button.2 Press the button to enter the Control menu.3 Use the button to scroll to Load Segments.4 Press the button.The current setting for the option flashes when selected.5 Select the desired load segment using the and buttons.6 Set the desired load segment ON or OFF using the button.7 Press the button for longer than one second to confirm.8 Set the other load segment if applicable.Configuring Automatic Start DelayYou can configure a load segment to turn on automatically after the utility power returns, if it was shutdown by: The button An external command with auto-restart option Battery under voltage state Automatic on battery shutdown commandYou can specify the restart delay time for each load segment: select zero seconds (0s is the default) torestart immediately, select 1–32767 seconds to delay for the specified time, or select Off.To set the restart delay times for each load segment:1 Press the button for longer than one second to go to the main menu selection and scroll down tothe Settings menu using the button.2 Press the button to enter the Settings menu.3 Use the button to scroll to the Automatic Start Delay option and press the button.The current setting for the option flashes when selected.4 Set the restart delay for one load segment using the and buttons.