Dell Dimension 1100 Owner's Manual

Also see for Dimension B110: Setup guide Service manual

Contents

Dell Dimension 1100 Owner's Manual Manual pdf 84 page image

84 AppendixSystem Setup OptionsNOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or maynot appear exactly as listed.SystemSystem Time Identifies the system clock time as formatted.System Date Identifies the date as formatted: Weekday MonthDrive ConfigurationDiskette Drive Identifies and defines the floppy drive attached to the FLOPPY connectoron the system board as Off, USB, Internal, or Read Only.Primary MasterDriveIdentifies the drive attached to the PRI IDE connectors on the systemboard, and lists the capacity for a hard drive.Primary SlaveDriveIdentifies and defines the slave drive to the primary master drive on PRIIDE. Can be turned Off or set to Auto (to detect the drive) and if present,lists the capacity for the drive.Secondary MasterDriveIdentifies the drive attached to the SEC IDE connectors on the systemboard, and lists the capacity for a hard drive (lists n/a for optical devicessuch as CD/DVD drives).Secondary SlaveDriveIdentifies and defines the slave drive to the secondary master drive on SECIDE. Can be turned Off or set to Auto (to detect the drive) and if present,lists the capacity for the drives (lists n/a for optical devices such as CD/DVDdrives).IDE Drive UDMA Identifies whether or not to enable UDMA (the Ultra Direct MemoryAccess mass storage interface).Hard-Disk Drive SequenceIdentifies the device types that are in first and second priority for bootingthe system.• System BIOS - devices such as hard drives and CD/DVD ROMs as listed inthe Boot Sequence section of this System Setup program• USB device - a device such as an external hard drive or USB memory keyBy default, System BIOS boot devices is first (in position 1), followed byUSB device. To change the order, select an option and press the + or - keyto move the selection up or down in priority.NOTE: If you insert a boot device and restart the computer, this option appearsin the system setup menu. To boot from a USB memory device, select the USBdevice and move it so it becomes the first device in the list.