l Options – A scrollable box listing options that define the configuration of your computer (including installed hardware, power conservation, and securityfeatures).Fields to the right of the listed options contain settings or values. The settings and values that you can change are brighter on the screen. All othersettings and values are set by the computer and cannot be changed. When appears to the right of an option, press to access a pop-up menu of additional options.l Key functions – A line of boxes across the bottom of all system setup screens that lists keys and their functions within the system setup program.l Help – Press for information on the option that is selected (highlighted).The following table shows CPU Information option information.The following table shows Integrated Devices (Legacy Select Options) information.Option FunctionSystem Time Displays the system time.System Date Displays the system date.Diskette Drive A: Displays floppy drive details.Primary Drive 0: Displays primary hard drive 0. The default is Auto.Primary Drive 1: Displays primary hard drive 1 (if installed). The default isOff.Secondary Drive 0: Displays secondary hard drive 0. The default is Auto.Secondary Drive 1: Displays secondary hard drive device type. The default isOff.Boot Sequence Displays boot sequence when is pressed.Memory Information Displays amount of system memory.CPU Information Displays CPU information when is pressed.Integrated Devices (Legacy SelectOptions)Displays integrated device options when ispressed.PCI IRQ Assignments Displays PCI IRQ assignments when is pressed.IRQ Reservations Displays the IRQ reservations when is pressed.Power Management Displays power management options when ispressed.System Security Displays system security options when ispressed.Keyboard Numlock Turns the Keyboard NumLock option on and off. Thedefault is On.Report Keyboard Errors Displays keyboard errors when set to Report. Thedefault is Report.Auto Power On Allows auto power-on. The default is Disabled.Remote Wake Up Allows remote Wakeup on LAN. The default is Off.Fast Boot Turns the fast boot option on and off. The default is On.System Event Log Displays the system event log when is pressed.Asset Tag Displays asset tag information.Option FunctionCPU Speed Sets the CPU speed. The default is Normal.Bus Speed Displays the bus speed.Processor ID Displays processor ID.Clock Speed Displays clock speed.Cache Size Displays cache size.Option FunctionSound Turns the integrated sound off and on. The default is On.Mouse Port Turns the mouse port off and on. The default is On.USB Emulation Turns USB emulation off and on. The default is On.USB Controller Turns the USB controller off and on. The default is On.Serial Port 1 Sets serial port options and turns the port off and on. Thedefault is Auto.Parallel Port Displays parallel port settings when is pressed.The default mode is PS/2 and the I/O address default is378h.IDE Drive Interface Sets the IDE drive interface options. The default is Auto.
