Back to Contents Page4 surround connector Use the black surround connector to attach multichannel-capablespeakers.5 line-in connector Use the blue line-in connector to attach a record/playback devicesuch as a cassette player, CD player, or VCR.On computers with a sound card, use the connector on the card.6 line-out connector Use the green line-out connector (available on computers withintegrated sound) to attach headphones and most speakers withintegrated amplifiers.On computers with a sound card, use the connector on the card.7 micro-phone/sidesurround connectorUse the pink and silver connector to attach a personal computermicrophone for voice or musical input into a sound or telephonyprogram.On computers with a sound card, the microphone connector is onthe card.The side-surround output provides enhanced surround audio forcomputers with 7.1 speakers.8 center/subwooferconnectorUse the yellow connector to attach a speaker to a Low FrequencyEffects (LFE) audio channel.9 VGA video connector If your monitor has a VGA connector, plug it into the VGAconnector on the computer.10 USB 2.0 connectors(5)Use the back USB connectors for devices that typically remainconnected, such as printers, keyboards, and mice, or for bootableUSB devices which may not function properly if attached to thefront connectors (see "System Setup" for more information onbooting to a USB device)It is recommended that you use the front USB connectors fordevices that you connect occasionally, such as joysticks orcameras.