Dell E1609WFP User Manual
Also see for E1609WFP: Quick setup guide
                           | |
Contents
| 
Activate the computer and monitor to gain access to the OSD.Pin Assignments15-pin D-Sub connectorPlug and Play CapabilityYou can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) usingDisplay Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can selectdifferent settings if required.Switch off - - - Off Less than 1 WNOTE: The OSD functions only in the normal operation mode. Otherwise one of the following messages will appear depending upon the selected input.NOTE: Dell E1609W Flat Panel monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.Pin Number Monitor Side of the 15-pin Side Signal Cable1 Video-Red2 Video-Green3 Video-Blue4 GND5 Self-test6 GND-R7 GND-G8 GND-B9 DDC +5V10 GND-sync11 GND12 DDC data13 H-sync14 V-sync15 DDC clockFlat Panel SpecificationsModel number Dell E1609W Flat Panel MonitorScreen type Active matrix - TFT LCDScreen dimensions 15.6 inches(15.6-inch wide viewable image size)Preset display area:l Horizontal 347.5mm (13.7 inches) |
Related manuals for Dell E1609WFP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine