Dell E2310HWFP User Manual
Also see for E2010H - 20" LCD Monitor: Setup guideUser guide
                              | |
Contents
| 
Back to Contents PageSetting Up the MonitorDell™ E2010H/E2210H/E2310H Flat Panel Monitor User's GuideAttaching the StandConnecting Your MonitorAttaching the Dell Soundbar (Optional)Removing the Stand BaseWall mounting (Optional)Attaching the StandConnecting Your MonitorTo connect your monitor to the computer:1. Turn off your computer and disconnect the power cable.2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of yourcomputer. Do not connect both cables on the same computer. Use both the cables only when they are connected to two different computers withappropriate video systemsConnecting the VGA CableConnecting the DVI CableNOTE: The stand is detached when the monitor is shipped from the factory.Remove the monitor cover and place the monitor on it.1. Fit two tabs on the upper part of the stand to the groove on the back of the monitor.2. Lower the monitor so that the monitor mounting area snaps onto the stand.CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. |
Related manuals for Dell E2010H - 20" LCD Monitor
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine