Dell E2310HWFP User Manual

Also see for E2010H - 20" LCD Monitor: Setup guide User guide

Dell E2310HWFP User Manual Manual pdf 30 page image

Product Specific ProblemsBack to Contents PageSettings OSD if the Color Management is turned off.l Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.l Run the built-in diagnostics.Image retention from a staticimage left on the monitor for along period of timeFaint shadow from the staticimage displayed appears onthe screenl Use the Power Management feature to turn off the monitor at all times when not in use(for more information, see Power Management Modes).l Alternatively, use a dynamically changing screensaver.l In OSD Menu, under Reset to Factory Settings, select Enable LCD Conditioning. Usingthis option may take several hours before the image is eliminated.l NOTE: Image Burn-in is not covered by your warranty.Specific Symptoms What You Experience Possible SolutionsScreen image is too small Image is centered on screen,but does not fill entire viewingareal Reset the monitor to Factory Settings.Cannot adjust the monitor withthe buttons on the front panelOSD does not appear on thescreenl Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.No Input Signal when usercontrols are pressedNo picture, the LED light isblue. When press "up", "down"or "Menu" key, the message "No input signal " will appear.l Check the signal source. Ensure the Computer is not in the power saving mode bymoving the mouse or pressing any key on the keyboard.l Check whether the signal cable is plugged in properly. Re-plug the signal cable ifnecessary.l Reset the computer or video player.The picture does not fill theentire screen.The picture cannot fill theheight or width of the screenl Due to different video formats (aspect ratio) of DVDs, the monitor may display in fullscreen.l Run the built-in diagnostics.

/ 30

Related manuals for Dell E2010H - 20" LCD Monitor