Dell E60S Installation And Service Manual

Also see for E60S: Installation and service manual

Table 10. iDRAC Direct LED indicator codesiDRAC Direct LEDindicator code ConditionFlashing green (on fortwo seconds and off fortwo seconds)Indicates that the laptop or tablet connected is recognized.Powers off Indicates that the laptop or tablet is unplugged.NIC indicator codesEach NIC on the back of the system has indicators that provide information about the activity and link status. The activity LEDindicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.Figure 88. NIC indicator codes1. Link LED indicator2. Activity LED indicatorTable 11. NIC indicator codesStatus ConditionLink and activity indicators are off. The NIC is not connected to the network.Link indicator is green, and activity indicator is blinkinggreen.The NIC is connected to a valid network at its maximum port speed,and data is being sent or received.Link indicator is amber, and activity indicator is blinkinggreen.The NIC is connected to a valid network at less than its maximumport speed, and data is being sent or received.Link indicator is green, and activity indicator is off. The NIC is connected to a valid network at its maximum port speed,and data is not being sent or received.Link indicator is amber, and activity indicator is off. The NIC is connected to a valid network at less than its maximumport speed, and data is not being sent or received.Link indicator is blinking green, and activity is off. NIC identify is enabled through the NIC configuration utility.Non-redundant cabled power supply unit indicatorcodesPress the self-diagnostic button to perform a quick health check on the non-redundant cabled power supply unit (PSU) of thesystem.System diagnostics and indicator codes 91