Replacing the solid-state drive/Intel OptaneEnable the Intel Optane device after you replace it. For more information about enabling the Intel Optane device, see Enabling Intel Optanememory.NOTE: Before working inside your computer, read the safety information that shipped with your computer and followthe steps in Before working inside your computer. After working inside your computer, follow the instructions in Afterworking inside your computer. For more safety best practices, see the Regulatory Compliance home page atwww.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.Procedure1. Align the notch on the solid-state drive or Intel Optane memory with the tab on the M.2 card slot.2. Slide the solid-state drive or Intel Optane memory into the M.2 card slot on the system board.3. Replace the screw (M2x3.5) that secures the solid-state drive or Intel Optane memory to the system board.Post-requisitesReplace the computer cover.13Replacing the solid-state drive/Intel Optane 23
